top of page


Public·12 members
Lincoln Bell
Lincoln Bell

Raspberry SSH Lite For Pi €? Control Your Raspberry Pi And Other SSH Enabled Devices By SSH. NO AD BETTER

Raspberry Pis are so convenient because they're inexpensive and small, but connecting one to its own monitor, keyboard and mouse requires a lot more space and money. If you're just trying to program on the Pi or use it to control electronics such as lights, motors and sensors, there's no need to connect it to a display or input devices because you can control the system remotely, using a VNC or SSH client on your main computer. We call this screenless install a headless Raspberry Pi setup.

Raspberry SSH Lite For Pi – Control your Raspberry Pi and other SSH enabled devices by SSH. NO AD


9. Set a username and password for your Pi. Note that if you use the password "raspberry" with username "pi," you may get a warning message when you log in, recommending (but not forcing you) that you change the password.

If your PC has a spare Ethernet port or you have an Ethernet-to-USB dongle, you can use a network cable to go directly from your Pi to your computer. Just make sure that you have Bonjour installed on your PC and SSH enabled on the Pi (see above). Then, you can just connect the two devices over Ethernet.

2. Enter the hostname (by default raspberrypi or raspberrypi.local ) as the address you wish to connect to in Putty, and click Open. You usually need to add the .local if the Pi is directly connected to your PC via USB or Ethernet cable.

If your device supports mDNS, you can reach your Raspberry Pi by using its hostname and the .local suffix.The default hostname on a fresh Raspberry Pi OS install is raspberrypi, so by default any Raspberry Pi running Raspberry Pi OS responds to:

Now you have the IP address of your computer, you will scan the whole subnet for other devices. For example, if your IP address is, other devices will be at addresses like,,, etc. The notation of this subnet range is (this covers to

Alternatively, you can enable SSH from within an existing installation of Raspberry Pi OS. With your Raspberry Pi connected to a monitor, open the raspberry icon menu on the desktop and select Preferences > Raspberry Pi Configuration. Then click the Interfaces tab and click the Enabled radio button for SSH.

There are several SSH remote access apps available in the Play Store, such as the free ConnectBot. To connect to your Raspberry Pi with it, click the + (plus) symbol and enter the login details, such as pi@raspberrypi.local or ssh pi@ You can also give it a nickname if you want. Click the + (plus) symbol to save the connection, then click on it from the list to connect to Raspberry Pi. Enter your password and you're in.

In most cases, your wired internet connection will now be up and ready for use, provided that your router has DHCP enabled. DHCP stands for Dynamic Host Configuration Protocol and basically assigns IP addresses to devices that connect to your router.

Since the Pi Zero W is WiFi enabled, we can preconfigure the operating system to enable SSH and have the WiFi credentials when we are first powering the device. Thus, when it comes online, it will be available on your local network for you to start using the Pi. Since we'll be controlling the device via command line, you'll want to be comfortable with the terminal.

'Pi' is the default Raspbian profile, which always has the same password ('raspberry'). So, when the SSH service was enabled by default, any user who could connect to the Raspberry network could easily log on to it as long as the credentials were not changed. This is why SSH was disabled in the basic setup.

For example, if you kept the default user and password, and someone gets access to another device on your network, they can easily get access to the Raspberry Pi too. But even if you changed the password, there are risks involved with this service enabled.

  • Open Real VNC Viewer.

  • Enter the address "raspberrypi.local:0", where "raspberrypi" is the hostname of your device, and press Enter. NOTE: Please make sure that your Raspberry Pi is not using the default password 'raspberry', so that your device is protected from unauthorized access.

  • Enter the username and password for the raspberry pi login. For example username "pi" and password "raspberry", and press OK.

  • The VNC session should start, and you should see your Raspberry Pi desktop.

  • Go to the Custom Tunnels page and find out the world-wide accessible address for your tunnel.

  • Open Real VNC Viewer and enter the "Available At" address from into the address field.

  • If you are asked about Duplicate VNC Server identify, press Continue.

  • Enter the username and password for the raspberry pi login. For example username "pi" and password "raspberry", and press OK.

  • The VNC session should start, and you should see your Raspberry Pi desktop.

When running the makerverse-raspberrypi-os-dekstop.** (desktop version), you will need to follow on-screen instructions after the first boot to configure your Raspberry Pi. This image is based upon a standard Raspberry Pi OS Desktop installation, so please refer to the official documentation for any help.

Want to learn how to use your Voice Kit to control other IoT devices? You can start here with a Particle Photon (a Wi-Fi development kit for IoT projects) and Dialogflow (a tool for creating conversational interfaces). This tutorial will show how to make your Voice Kit communicate with Dialogflow (and Actions on Google) to control an LED light with the Photon by voice.

Assuming you have all the required devices and accounts as noted above, the first thing you'll want to do is to set up apps on the corresponding services so you can get your devices talking to each other.

After your first setup of openHABian is successful and you are able to access the openHAB dashboard, you should dig into the possibilites.Install Bindings (opens new window), discover your devices, and configure your smart home (opens new window).You might want to start defining Items (opens new window), Sitemap (opens new window) and HABPanel (opens new window) dashboard for your home, but these are just some first hints.Be sure to read up on the Configuration (opens new window) section of the documentation pages to learn more.

Additionally, you might want to quickly transfer files between your Pi and other devices. Bluetooth will work for this case, but only for transferring files from the Raspberry Pi to another device, unless you go through the effort of setting up an OPP Server.

Once you are set up with Tailscale, you might want to explore other possibilities, like using Taildrop to send files from one of your devices to another, or making your own privacy VPN by using your Raspberry Pi as an exit node.

Wait for the Pi to finish starting up, and connect to it using your SSH client.The default user name is pi, and the hostname and password are what you defined in the RPi Imager advanced menu at Step 1. The default hostname raspberrypi is used in the example below.

Connecting to your Pi using SSH requires you to know its address.Often, your network already knows the address of your Pi by its hostname. If you haven't changed it at Step 1, the default hostname of your Pi is raspberrypi.

Now, your Raspberry Pi should be accessible remotely via SSH. The default username is pi and password is raspberry. To connect to your Raspberry Pi using SSH for the first time, run the following command:

After installing OctoPi and upgrading OctoPrint, it will be necessaryto ssh into the target machine to run a handful of system commands. Ifusing a Linux or MacOS desktop, then the "ssh" software should alreadybe installed on the desktop. There are free ssh clients available forother desktops (eg,PuTTY). Use thessh utility to connect to the Raspberry Pi (ssh pi@octopi -- passwordis "raspberry") and run the following commands:

Log into your Pi via SSH (it is located at octopi.localif your computer supports bonjouror the IP address assigned by your router), default username is pi, default password is raspberry.Run sudo raspi-config. Once that is open:

On your desktop, start by downloading Raspberry Pi OS (32-bit) Lite (about 400 MB). If possible, please use the Torrent file and seed it for others. Once downloaded, I had a file named that was 452.7 MB.

Once everything is connected, go ahead and plug your power supply into the Pi. You should see some raspberry icons in the upper left and scrolling text as it boots. When it comes to the login prompt, read upwards until you find a line that says "My IP address is ..." (probably starts with 192.168). My Pi's IP address was, but yours is likely different.

All of the next steps must be done on the Raspberry Pi itself. You can either connect a keyboard/monitor to the Pi or SSH in remotely. Login locally with the user name pi and the password raspberry (lower case). To SSH in remotely, execute the following command from a terminal on your desktop computer (where is your Pi's IP address):


Welcome to the group! You can connect with other members, ge...


  • deisaray jones
  • Andres Faria
    Andres Faria
  • Asher Ward
    Asher Ward
  • Ian Walker
    Ian Walker
  • Joseph Foster
    Joseph Foster
Group Page: Groups_SingleGroup
bottom of page